Error 99 a Canon 1000d - Canon fórum - Fórum | ePhoto.sk

angelina187 2011-07-30 12:55:31+02

Už som tu videla podobnu temu,ale skusala som vela veci a dalej si neviem rady.Zrazu po 2 rokoch fotenia mi ukazuje tuto chybu 99..fotak mam z anglicka,takze nie je mozne ho ani reklamovat ani nic.
Skusala som dat novy software,objektiv,bez objektiva....a stale to ukazuje
Neviem kolko by stala oprava a neviem ani kde sa mam obratit,ci na pobocku canon na slovesku,ani ako dlho to bude trvat a stat.
Kto by poradil a pomohol ,bola by som velmi vdacna.

0

Karol Srnec redakcia ephoto.sk

2011-07-30 13:02:25+02

Error 99 znamena vsetky ostatne chyby, ktore fotak nevie sam detekovat (zoznam chyb mas v navode). Takze ked fotak nevie co toje, ako to mamae vediet my. Zanes to do servisu. Jedine servisny techn ik je schopny zistit, co tomu je akolko to bude stat. Adresu servisu mas na zarucaku.

0

mathino 2011-07-30 13:02:40+02

Skús toto:

To isolate the cause of the issue, we suggest that you do the following:

1. Turn off the camera.
2. Remove the lens, battery, and CF card.
3. Allow the camera to sit without power for approximately 20 minutes.
4. Insert a fully charged battery, and turn on the camera.
5. Depress the shutter button as you would to take a picture.

Does the “ERR 99″ message appear? If it does, then the camera should be
serviced. If it does not, then please proceed to the next set of steps:

1. Turn off the camera.
2. Insert the CF card.
3. Turn on the camera.
4. Format the CF card in the camera.
5. Depress the shutter button as you would to take a picture.

Does the “ERR 99″ message appear? If so, then the CF card is the most
likely source of the issue. Try using a different card.

If the message does not appear, please complete the following steps:

1. Turn off the camera.
2. Clean the lens contacts by gently rubbing them with a pencil eraser
or soft cloth. Be careful that you do not let any debris fall into the
camera body.
3. Reattach your lens.
4. Turn on the camera.
5. Depress the shutter button as you would to take a picture.

If the “ERR 99″ message only appears when one particular lens is attached, then that lens should be examined by a service technician.

If you see the “ERR 99″ with a different Canon lens attached, then the camera should be serviced.

0

Jozef Krajčo externý redaktor

- moderator

2011-07-30 13:05:55+02

- precistit este kontakty
- baterka
- ale najpravdobnejsie uzavierka (Vymena cca 150€, http://www.matunak.sk/ mam dobre skusenosti)

0